The 76 Dixie boat project. The final fiberglass work on the stringers is now done, as well as the drain tube between the storage compartment and the drainage area where the plug will be. The wires coming up are from the bilge pump, I am looking at the best way to install it. I would also like to show y'all what went from looking at it for a good friend/customer that turned into a new project. This late 80s Lincoln Diesel Shield-Arc SA-250 welder. The unit wouldn't start, I quickly figured out it was a fuel issue. After talking with the customer it was decided to do an upgrade on the fuel system with new fuel lines and filter assembly to prevent this from happening again. The customer also asked me to look at the cooling system, as he thought there might be a leak. After doing some investigating I discovered that it has a small crack in the radiator tank. I will remove the radiator tomorrow so the customer can fix it.
Dimension:
1600 x 1200
File Size:
62.28 Kb
Be the first person to like this.